Product Search
Search results for 'T-126'
Showing 41 - 61 of 563 Total Results
Feeler Gauge Set, .002 to .025
CA-0485
Location: Planeness/Thickness Gauges
When used with the steel parallel bar, Test Mark's feeler gauge will determine the planeness of testing machine platens, cylinder cappers and other testing accessories.
CA-2080
Location: Sieve Storage Rack
This adjustable bench rack holds all diameters of sieves up to 12" (305mm) maximum. Stainless steel rack has non-skid rubber feet, and two permanent and two adjustable rubber-coated sieve support rods.
(3) options
Location: Test Platens
Used for testing 6” (152 mm) concrete cubes and cylinders in compression . The platens bearing block is 6.5” (152 mm) square, through hardened to HRC 55 or greater, plane to .0005” (.012 mm) in any 6” (152 mm) area, has concentric circles for easier centering of cylinders and is hard nickel plated...
SA-1500
Location: Static Cone Penetrometer
Static Cone Penetrometers from Test Mark are used to evaluate the consistency of soils, their level of compaction and the bearing capacity of shallow foundations and pavement sub-grades.
SA-0110
Location: CBR Accessories
CBR mold. 6" ID x 7" H with 2" detachable collar. Mold volume of .1145 cu. ft., cold-rolled steel tubing, plated for rust resistance. Collar extension and perforated base plate can be clamped on either end of cylinder.
Digital Infrared Non-Contact Thermometer
CA-0733-R
Location: Digital Infrared Non-Contact Thermometer
The Digital Infrared Non-Contact Thermometer from Test Mark features a surface temperature measuring range of -31 to 689° F (-35 to 365° C), laser On/Off function, resolution of 0.5° F (0.2° C), accuracy of + 2.7°F (+ 1.5°C), °C/°F switchable, emissivity 0.95 or 0.70, auto power off. Operates on 2...
(4) options
Location: Aluminum Moisture Boxes
Test Mark provides aluminum moisture boxes that protect the sample from exposure during weighing operations.
MA-0135
Location: Concrete Cylinder Loading Shelf, CM-2500 Series
Easier loading of 6” cylinders in CM-2500 series machines. . This optional shelf was designed to make loading and positioning of 6” (152 mm) cylinders with pad cap rings both easier and safer in a CM-2500 series machine. The shelf features a heavy-duty steel design with a plastic laminated top, so...
Cover Plate for Bronze Cube Mold
CA-0280-C
Location: Cement
Bronze cover plate with filling holes used with bronze cube mold for capping compound compressive strength testing.
CA-0791
Location: Min/Max Thermometers
This Digital Thermometer registers minimum and maximum temperatures in both Fahrenheit and Celsius. Temperature range is 32 to 122°F and 0 to 50°C. Large display shows humidity, temperature and time. Thermometer also serves as an alarm clock.
CA-1320
Location: Hot Plates
Test Mark's laboratory hot plate features a white ceramic surface that is acid and alkali resistant. Non-heating frame surrounds the heated plate for added protection. Easy to set analog temperature control knob with graduated scale and LED display.
CA-2590
Location: Moisture Encounter
The concrete moisture encounter from Test Mark provides an instantaneous, nondestructive moisture measurement on concrete floors.
CA-0289
Location: Grout Sample Box
The grout sample box from Test Mark features engineered-slotted corrugation which retains moisture while simulating CMU absorption rate.
CA-6010
Location: Specimen Curing
Aquafog from Test Mark provides clouds of fog that will humidify concrete curing rooms...available as part of a complete line of concrete testing equipment.
Non-Mercury Min/Max Thermometer
CA-0790-A
Location: Min/Max Thermometers
Mercury free, environmental friendly spirit filled thermometer. This dual-scale min/max thermometer has U-shaped capillary mounted in a rugged plastic case with eye hole for wall mounting. Indicates present temperature and the highest/lowest temperature since last reset.
Muffle Furnace 4 1/4" x 5" x 6"
CA-1480
Location: Muffle Furnace
Test Mark's small bench-top muffle furnace features heating elements on top and side to provide uniform temperature.
SA-0240
Location: Pocket Penetrometer
The Soil Pocket Penetrometer from Test Mark is used for the evaluation and classification of cohesive soils in terms of soil consistency.
(4) options
Location: Tamping Rods
Tamping rods from Test Mark eliminate air voids in concrete when making slump tests, concrete cylinders or conducting concrete air entrainment test.
Construction Evaporation Meter
CA-5200
Location: Weather Tracker
Test Mark's Construction Weather Tracker displays evaporation rates for concrete testing applications.
CA-3210
Location: Water/Cement Ratio
The Cementometer is used for rapid determination of the moisture content of fresh cement and concrete, available from Test Mark Industries.
